Electrocardiograph- Three Channel

Features

• Simultaneous acquisition of all 12 leads.
• High Resolution Graphic TFT (Color) display for one screen preview of ECG waveform
• Full alphanumeric keypad to enter patient and clinic information
• Digital filters to eliminate baseline drift, AC& EMG interference
• Isolation protection against defibrillation
• Real-time clock of date and time indication
• Paper-out indication
• Printing options i.e.: Rhythm lead, medians, enlarge median, Graphical Axis, Measurements & Interpretation
• Internal ECG data Storage of up to 100 Patients.
• Unlimited data storage through USB memory stick (optional)
• Offline ECG data transfer to PC (optional)
• Direct A4 ECG printing (optional)
  

• A/D Resolution            12 Bit
• Lead Selection            Standard 12 Leads

• Low pass filter :  20, 35, 40,130 Hz             
  
• High pass filter :  0.05, 0.10, 0.50 & 1.0 Hz
• Notch filter 50/60 Hz
• Acquisition : Auto/Manual
• Memory : 100 patient
• Input impedance : >100 M ohm
• Frequency Response : 0.05-150Hz
• CMRR : 100dB
• Time Constant : 3.2 sec
• Sensitivity : 5mm/mV, 10mm/mV,20mm/mV
• Leakage Current : <10 micro Ampere
  

• Display Format : Three Channel
• Graphics Display : 320 X240 pixels TFT Screen (Color)
• Display Size : 3.5”
  

• Recorder : Thermal Printer
• Paper Speed : 12.5mm/sec., 25mm/sec., 50mm/sec.
• Recording Paper : Thermo Sensitive 80mm (Rolled)
• Printing Labels : Patient Information Templates, Leads,Calibration, Print Speed, Filter, Sensitivity

• A) Auto mode-3, 3+R with medians, 3+R with  Medians + Axis + measurements & interpretation
• B) Manual mode -3 channel three different lead selected from keypad
  

• Line Power supply : ~220-240v, 50Hz ± 10%
• Power Supply Operation : AC/DC with on/off line Battery Charging
• Battery :    ___12V/1.2AH (Lead Acid)
• Charging Time : 3Hours
  

• Dimensions (mm) : 288mm X238mm X85mm
• Weight : 1.8 Kg approx.
  

• Type of Protection        Class II A
• Degree of Protection        Type BF
• Communication Interface        USB
  

• Component : Quantity
• ECG Patient Cable : 01
• Adaptor 19V, 3A, AC-DC : 01
• Power Cord : 01
• Fuse T 1.5 A : 01
• Earthing Wire (optional) : 01
• Bulb Electrode : 06
• Limb Electrode : 04
• Conducting Tube Jelly : 01
• Thermal Printer Paper Roll : 01
• User Manual : 01